How to clean the engine easily

How to clean the engine easily - for engines with injection system, the injector is a component that has a very important function. Injector function is nothing more than to spray and mengabutkan fuel into the combustion chamber. You can imagine, when the injection process is interrupted or not optimal, the effect could be an impact on the engine performance. Either stalled, draw less or worse machines can not live. perform for the meticulous service at authorized workshops. But if you want to clean the injector itself, there are actually several ways that are easy to do at home. Consider the following practical ways.

ninja 250 clean

1. carbon cleaner

The most practical way is how to use Yamalube Carbon Carbon Cleaner Cleaner. Even the chemical mix in the gas tank of liquid, the dirt in the injector is to be removed. How very easy to use the Live-mixing of the liquid in a tank, the fuel is between 3.5 to 5 liters and do every 3000 km every contained.

2. With the "infusion"

Many offer official workshop, the cleaning began the injector in this way. The process makes liquid cleaner coal as a fuel and in injek using special equipment such as infusion. So the fuel hose is connected is removed and then filled with special tube with carbon cleaner. The tubes were the compressed air from the compressor optionally include coal cleaner in the combustion chamber. The machine is turned on while fumigated. This process only takes about 5 minutes, until the liquid runs out and the machine will automatically turn off. This method can be carried out every 10,000 km.

3. Injector clener

How injectors Motor latter is quite complicated to clean and can be carried out in the workshop. This is because the injectors must be removed and then inserted into a tool called injector cleacer & tester. Once included in the tool, it is known how many credit or pressure of the injector. If it is less than the standard, then it might be due to dirty injectors. If dirty then the next injector with special liquid and ultrasonic vibration is to remove the dirt in it, where are soaked.

Thus was how injectors engine clean. If you want a practical and can then use the first option to be performed at home. But if you want that to maximize results and dirt in the injector completely lost choose the second or third option, which can be carried out in the workshop.

Tweet