An easy way, with its own motor oil change

An easy way, with its own motor oil change - Each vehicle should change the oil regularly brought to the workshop or replace it yourself.

If you want to change the oil in order to put your vehicle on a higher level and the position must be between the front and back (not italics) be parallel.

Oil

Then, open the hood and remove the lid of the oil filling, so that the oil can when discarded or removed or drained flow smoothly.

Then set up to collect a container used oil, remove the engine cover screws in the bottom of the machine use by a key offside.

Noteworthy is the screw that it is a ring or gasket, make sure that the state is in a good condition, should be replaced by new ones if damaged.

After the waste oil drained oil Replace the cover, observe the mounting screws, do not tip because it will leak will result in leaks or oil.

Once the bolt is installed correctly, enter the new engine oil in accordance with the specifications of your car engine.

To determine the amount of new engine oil, the amount is sufficient or not, turn your car a couple of minutes and then turn off, unplug the existing oil sticks to the left of the top of the motor when the liquid oil an upper Beat adequate number of means and vice versa.

Once the device is turned on, check the bottom of the machine, make sure that no engine oil drips onto the oil drain plug locations or depletion.

One thing that we need to emphasize is this work should be done if the conditions the engine is hot, at the time of the engine oil because heat in a state of more dilute than the cold, so that the dirt dissolved in the oil flows out.

Tweet